knowledgebase home :: PCM42
PCM42 knowledgebase Topics
|
PCM42 GENERAL QUESTIONS | |
| All PCM42 Entries: | |
| What jumper is changed for the MEO option? | W2, W3 and W4 all have the jumper placed at the center pin and the pin closest to the rear panel. |
| How does the jumper need to be set for memory expansion? | W2, W3 and W4 should be in the 1 position if memory expansion is installed. If no memory expansion is installed W2, W3 and W4 should be in the 0 position. |
| How do you use the clock mode? | The tempo of the clock output will be half of what the delay time displayed is. You can than enter the clock mode and define a beat value which will be related to your tempo. |
| Can you use a power switch from the PCM80 or 90 for the PCM42? | No, the PCM80 and 90 use a PBPLP, 4P2T, PCRA, 2.5mmTRAV switch, Lexicon part number 453-09772. The PCM41 and 42 us a PB, PP, 10P2T, ALPS switch, Lexicon part number 453-02112. |
